Electric cylinder series ELEKTRO ROUND DC
The ELEKTRO ROUND DC cylinder, with trapezoidal or multi-start screw and self-lubricating nut, is driven by a 24VDC motor with planetary gearbox (1:13 or 1:25) and optional encoder. Available with inline or belt-driven motor, IP65 rating, reversible or irreversible; anti-rotation is external.
Electric axis series ELEKTRO SHAK
Electric rodless belt cylinder with V-Lock interface, built from anodized aluminum extrusion for high rigidity. The carriage runs on hardened guides with adjustable play rollers and lubrication nozzles. Motion is driven by a reinforced belt with mechanical tensioning. Available with brushless or stepper motors, also customizable. Homing via included inductive sensor. Two sizes (SHAK 340 and 470) with standard strokes, motor mountable in 4 positions. Optional accessories include cable guides.
Electric axis series ELEKTRO SHAK GANTRY
The SHAK-GANTRY portal features two parallel belt axes linked by an anodized shaft and elastic joints for synchronous motion. V-Lock carriages support a SHAK electric Y-axis. Rigid structure with adjustable play, lubricated guides and adjustable belts. Brushless motor with 1:5 reducer ensures high load and speed performance. Available in two sizes (340 and 470) with standard strokes, motors mountable left or right. Homing via included inductive sensor. Accessories: optional holding brake and cable guide system.
Electric cantilever axis series ELEKTRO SVAK
SVAK is a cantilever belt-driven rodless axis: the motor and reducer are fixed to the carriage while the extrusion moves. Designed mainly for vertical use, it includes a holding brake and integrates with SHAK GANTRY for X-Y-Z Cartesian systems. Made of anodized aluminum with hardened guides and adjustable rollers, it uses a toothed belt with tensioning and lubrication ports. Equipped with brushless motor with 1:2 reducer, inductive homing sensor, and optional cable chain system.
Electric axis - rodless series ELEKTRO SK
Rodless screw-driven axis available in two sizes: SK-0, with carriage on wear-resistant resin pads and stainless-steel multi-start screw with self-lubricating nut; SK-2, with carriage on preloaded ball bearings, pre-tensioned screw and dedicated lubrication ports. Both feature slots for magnetic sensors, while SK-2 allows motor mounting inline or via belt drive. Carriage plates can be V-Lock or custom. Stepper or brushless motors available, with optional brake and encoder; other motor interfaces on request.
Electric compact cylinder series ELEKTRO SSC
The ELEKTRO SSC electric cylinder, ISO 15552 interface, is designed for compactness with no front/rear heads. Available in predefined strokes with either hardened steel ball screw or stainless multi-start screw with technopolymer nut. Features removable anti-rotation, piston magnet, and dual slots for Square sensors. Easy re-greasing via removable plate; compatible with standard pneumatic accessories. Inline or belt-driven versions, with stepper or brushless motors, dedicated drives, and custom flanges/couplings on request.
Electric axis - rodless series ELEKTRO BK
Belt-driven rodless electric axis, anodized aluminum body with integrated linear guides and V-Lock interface. Available in two sizes: BK-1 (Medium with roller guides or Heavy with recirculating ball carriages) and BK-2 (Heavy with two carriages or Heavy XL with four carriages and dirt protection). Carriage features V-Lock profile (except BK-2 Heavy XL). Polyurethane steel-reinforced belt ensures efficiency and low noise. Stepper or brushless motors available with brake, encoder, and reducers. Interfaces for third-party motors on request.
Electric cylinder series ELEKTRO ISO 15552 EK
Electric cylinder with ISO 15552 interface, ELEKTRO ISO 15552 EK series, designed for reduced size and cost. Stroke via hardened screw with ball nut or trapezoidal screw with bronze nut. Features integrated anti-rotation with technopolymer pads, piston with magnet, and slots for magnetic sensors. Includes screw/nut lubrication system. Available only with in-line motor (belt-driven on request), stepper or brushless, with or without brake. Custom flanges for third-party motors available on request.
Electric cantilever axis series ELEKTRO VBK
The VBK belt-driven rodless axis features an anodized aluminum extrusion and linear guide with recirculating ball bearings. The motor-gearbox is fixed to the central body (“cantilever” setup), which stays still while the extrusion moves. Motion is transmitted by a reinforced polyurethane toothed belt with parabolic profile, ensuring high efficiency, low noise and vibration. Available with mm-precise strokes, adjustable belt tension, and relubrication channels. Extrusion includes V-Lock profile and internal cable/tube passage. Brushless motor with brake and planetary gearbox available, mountable on both sides.
Electric slide series ELEKTRO CS
The ELEKTRO CS electric slide is compact and robust, featuring recirculating ball guide and carriage for high radial loads. The stainless-steel rod, driven by a hardened screw and ball nut, is linked to a carriage preventing rotation. Equipped with a magnet for Square sensors and a lubrication port (IP65 maintained with external vent). Available in standard or V-Lock interface versions. Motors can be stepper or brushless, inline or with 3 belt-drive layouts. Wide range of standard/dedicated accessories; custom flanges and couplings available on request.
Electric rotary cylinder series ELEKTRO RBA
The compact RBA electric rotary actuator allows unlimited rotation in both directions via a toothed belt drive with adjustable eccentric tensioner. The driven pulley features a through-hole for cable/tube routing, ensuring easy integration. Mounting is possible on all body surfaces, with flexible flange positioning. It can be used as a rotary table or combined with moving axes (e.g. VBK). Available in two sizes, RBA-1 and RBA-2, with brushless or stepper motors with encoder and brake; the RBA-2 version includes a precision planetary gearbox.
Electric cylinder series ELEKTRO MINI DC
The ELEKTRO MINI DC cylinder is compact and lightweight, featuring a trapezoidal screw with self-lubricating polymer nut for irreversibility and anti-rotation. The piston includes a magnet for sensor detection. Driven by a 24VDC motor with resettable fuse, it is also available with encoder for position control. The geared version offers ratios of 1/12, 1/27, 1/48, and 1/108, with IP40 protection. Suitable for applications with low duty cycles and moderate precision, where high forces or speeds are not required.
Electric cylinder series ELEKTRO MULTIFIX
The ELEKTRO MULTIFIX cylinder is an electric actuator with rod guided by two columns on sintered bronze bushings or recirculating ball bearings, designed to withstand lateral loads. Motion is achieved via a ball screw and nut driven by an electric motor. The rod integrates a magnet for Square sensors housed in body slots. A lubrication port is provided for maintenance. Available with inline or belt-driven motors (three layouts), stepper or brushless, with dedicated drives. Special flanges and couplings available on request.
